亚洲城ca88唯一官网

更多
首页 -- 亚洲城ca88唯一官网安装施工事项 -- 亚洲城ca88唯一官网都有哪一些作用呢?
亚洲城ca88唯一官网都有哪一些作用呢?

当建筑的长度超过规定、平面图形曲折变化比较多或同一建筑物不同部分的高度或荷载差异较大时,建筑构件内部会因气温变化、地摹的不均匀沉降或地展等原因产生附加应力。

When building in excess of the prescribed, the length of the plane figure tortuous changes more or the same height of the different parts of the building or load differences, building will due to temperature changes, a copy of component such as uneven settlement or to show cause additional stress.

当这种应力较大而又处理不当时,会引起建筑构件产生变形,导致建筑物出现裂缝甚至破坏,影响正常使用与安全。所以在设计时事先将建筑物用垂直的缝分成几个单独的部分,使各部分能够独立地变形。这种将建筑物垂直分开的预留缝隙称为亚洲城ca88唯一官网。

Can't deal with at the time, when the stress is larger and would cause construction deformation, cracks in building damage, even affect the normal use and safety. So in advance in the design of buildings in the vertical seam is divided into several separate parts, each part able to independently deformation. The separate buildings vertical reserved aperture is called deformation seam.

亚洲城ca88唯一官网按其作用的不同分为亚洲城ca88唯一官网、沉降缝、防震缝三种。

According to its function of deformed joints divided into expansion joints and settlement joints, shockproof seam 3 kinds.

建筑中的亚洲城ca88唯一官网应依据工程实际情况设里.并需符合设计规范规定,其采用的构造处理方法和材料应根据其部位和需要分别满足盖缝、防水、防火、保温等方面的要求,并确保缝两侧的建筑构件能自由变形而不受阻碍、不被破坏。

Deformation cracks in buildings should be set according to the engineering actual situation. And need to comply with the regulations of design specifications, the treatment method and the structure of the materials shall be according to their site and need to meet lid suture, waterproof, fire prevention, heat preservation requirements, and ensure the seam on both sides of the building component can free deformation and unhindered, not be destroyed.


关于我们 | 联系我们 | 设为主页 | 加入收藏